#============================================================
# FAMILY "Cyclone V"
# DEVICE 5CEBA4F23C7N
# Board DE0-CV
#============================================================

# Inicio da configuração dos pinos.

#============================================================
# CLOCK
#============================================================
set_location_assignment PIN_M9 -to CLOCK_50
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CLOCK_50

#============================================================
# HEX0
#============================================================
set_location_assignment PIN_U21 -to HEX0[0]
set_location_assignment PIN_V21 -to HEX0[1]
set_location_assignment PIN_W22 -to HEX0[2]
set_location_assignment PIN_W21 -to HEX0[3]
set_location_assignment PIN_Y22 -to HEX0[4]
set_location_assignment PIN_Y21 -to HEX0[5]
set_location_assignment PIN_AA22 -to HEX0[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX0[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to HEX0
set_instance_assignment -name SLEW_RATE 1 -to HEX0

#============================================================
# HEX1
#============================================================
set_location_assignment PIN_AA20 -to HEX1[0]
set_location_assignment PIN_AB20 -to HEX1[1]
set_location_assignment PIN_AA19 -to HEX1[2]
set_location_assignment PIN_AA18 -to HEX1[3]
set_location_assignment PIN_AB18 -to HEX1[4]
set_location_assignment PIN_AA17 -to HEX1[5]
set_location_assignment PIN_U22 -to HEX1[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX1[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to HEX1
set_instance_assignment -name SLEW_RATE 1 -to HEX1

#============================================================
# HEX2
#============================================================
set_location_assignment PIN_Y19 -to HEX2[0]
set_location_assignment PIN_AB17 -to HEX2[1]
set_location_assignment PIN_AA10 -to HEX2[2]
set_location_assignment PIN_Y14 -to HEX2[3]
set_location_assignment PIN_V14 -to HEX2[4]
set_location_assignment PIN_AB22 -to HEX2[5]
set_location_assignment PIN_AB21 -to HEX2[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX2[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to HEX2
set_instance_assignment -name SLEW_RATE 1 -to HEX2

#============================================================
# HEX3
#============================================================
set_location_assignment PIN_Y16 -to HEX3[0]
set_location_assignment PIN_W16 -to HEX3[1]
set_location_assignment PIN_Y17 -to HEX3[2]
set_location_assignment PIN_V16 -to HEX3[3]
set_location_assignment PIN_U17 -to HEX3[4]
set_location_assignment PIN_V18 -to HEX3[5]
set_location_assignment PIN_V19 -to HEX3[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX3[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to HEX3
set_instance_assignment -name SLEW_RATE 1 -to HEX3

#============================================================
# HEX4
#============================================================
set_location_assignment PIN_U20 -to HEX4[0]
set_location_assignment PIN_Y20 -to HEX4[1]
set_location_assignment PIN_V20 -to HEX4[2]
set_location_assignment PIN_U16 -to HEX4[3]
set_location_assignment PIN_U15 -to HEX4[4]
set_location_assignment PIN_Y15 -to HEX4[5]
set_location_assignment PIN_P9 -to HEX4[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX4[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to HEX4
set_instance_assignment -name SLEW_RATE 1 -to HEX4

#============================================================
# HEX5
#============================================================
set_location_assignment PIN_N9 -to HEX5[0]
set_location_assignment PIN_M8 -to HEX5[1]
set_location_assignment PIN_T14 -to HEX5[2]
set_location_assignment PIN_P14 -to HEX5[3]
set_location_assignment PIN_C1 -to HEX5[4]
set_location_assignment PIN_C2 -to HEX5[5]
set_location_assignment PIN_W19 -to HEX5[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to HEX5[6]
set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to HEX5
set_instance_assignment -name SLEW_RATE 1 -to HEX5

#============================================================
# KEY
#============================================================
set_location_assignment PIN_U7 -to KEY[0]
set_location_assignment PIN_W9 -to KEY[1]
set_location_assignment PIN_M7 -to KEY[2]
set_location_assignment PIN_M6 -to KEY[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to KEY[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to KEY[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to KEY[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to KEY[3]

#============================================================
# KEY (Reset)
#============================================================
set_location_assignment PIN_P22 -to FPGA_RESET_N
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to FPGA_RESET_N

#============================================================
# LEDR
#============================================================
set_location_assignment PIN_AA2 -to LEDR[0]
set_location_assignment PIN_AA1 -to LEDR[1]
set_location_assignment PIN_W2 -to LEDR[2]
set_location_assignment PIN_Y3 -to LEDR[3]
set_location_assignment PIN_N2 -to LEDR[4]
set_location_assignment PIN_N1 -to LEDR[5]
set_location_assignment PIN_U2 -to LEDR[6]
set_location_assignment PIN_U1 -to LEDR[7]
set_location_assignment PIN_L2 -to LEDR[8]
set_location_assignment PIN_L1 -to LEDR[9]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[7]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[8]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LEDR[9]

set_instance_assignment -name CURRENT_STRENGTH_NEW DEFAULT -to LEDR
set_instance_assignment -name SLEW_RATE 1 -to LEDR

#============================================================
# SW
#============================================================
set_location_assignment PIN_U13 -to SW[0]
set_location_assignment PIN_V13 -to SW[1]
set_location_assignment PIN_T13 -to SW[2]
set_location_assignment PIN_T12 -to SW[3]
set_location_assignment PIN_AA15 -to SW[4]
set_location_assignment PIN_AB15 -to SW[5]
set_location_assignment PIN_AA14 -to SW[6]
set_location_assignment PIN_AA13 -to SW[7]
set_location_assignment PIN_AB13 -to SW[8]
set_location_assignment PIN_AB12 -to SW[9]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[0]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[1]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[2]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[3]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[4]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[5]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[6]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[7]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[8]
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to SW[9]

#============================================================
# VGA
#============================================================
#set_location_assignment PIN_B6 -to VGA_B[0]
#set_location_assignment PIN_B7 -to VGA_B[1]
#set_location_assignment PIN_A8 -to VGA_B[2]
#set_location_assignment PIN_A7 -to VGA_B[3]
#set_location_assignment PIN_L7 -to VGA_G[0]
#set_location_assignment PIN_K7 -to VGA_G[1]
#set_location_assignment PIN_J7 -to VGA_G[2]
#set_location_assignment PIN_J8 -to VGA_G[3]
#set_location_assignment PIN_A9 -to VGA_R[0]
#set_location_assignment PIN_B10 -to VGA_R[1]
#set_location_assignment PIN_C9 -to VGA_R[2]
#set_location_assignment PIN_A5 -to VGA_R[3]
#set_location_assignment PIN_H8 -to VGA_HS
#set_location_assignment PIN_G8 -to VGA_VS
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_B[0]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_B[1]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_B[2]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_B[3]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_G[0]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_G[1]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_G[2]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_G[3]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_R[0]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_R[1]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_R[2]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_R[3]
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_HS
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to VGA_VS

#set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to VGA_*

#====================================================================
# Fim da configuração dos pinos utilizados em Design de Computadores.
#====================================================================